[xbbs @ 2026-03-19 00:43:19+0000 INFO] Running command git clone https://github.com/managarm/linux-mlibc.git . (env=None, cwd='/var/lib/xbbs/tmp/tmp5zzcx9_q/src') Cloning into '.'... [xbbs @ 2026-03-19 00:43:20+0000 INFO] Exit code: 0 [xbbs @ 2026-03-19 00:43:20+0000 INFO] Running command git checkout 70b1b50553d042c281526e0c36f96b34bbd79c0f (env=None, cwd='/var/lib/xbbs/tmp/tmp5zzcx9_q/src') Note: switching to '70b1b50553d042c281526e0c36f96b34bbd79c0f'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 70b1b50 libxtrans: Enable [xbbs @ 2026-03-19 00:43:20+0000 INFO] Exit code: 0 [xbbs @ 2026-03-19 00:43:20+0000 INFO] Running command xbstrap init /var/lib/xbbs/tmp/tmp5zzcx9_q/src (env=None, cwd='/var/lib/xbbs/tmp/tmp5zzcx9_q/build') [xbbs @ 2026-03-19 00:43:24+0000 INFO] Exit code: 0 [xbbs @ 2026-03-19 00:43:24+0000 INFO] Running command xbps-install -Uy -R http://10.0.69.1:10999/repos/gnnjmEJ6fLMGuWR1ijkJIg/packages/x86_64/ -r /var/lib/xbbs/tmp/tmp5zzcx9_q/build/system-root -SM -- mlibc base-files kernel-headers mlibc-headers (env={'XBPS_ARCH': 'x86_64'}, cwd='/var/lib/xbbs/tmp/tmp5zzcx9_q/build') [*] Updating repository `http://10.0.69.1:10999/repos/gnnjmEJ6fLMGuWR1ijkJIg/packages/x86_64//x86_64-repodata' ... x86_64-repodata: [2998B 100%] 43MB/s ETA: 00m00s x86_64-repodata: 2998B [avg rate: 43MB/s] 4 packages will be downloaded: 4 packages will be installed: mlibc-0.0pl5540_1 base-files-1.0_1 kernel-headers-6.12.8_1 mlibc-headers-0.0pl5540_1 Size to download: 4442KB Size required on disk: 23MB Space available on disk: 756GB [*] Downloading packages mlibc-0.0pl5540_1.x86_64.xbps.sig2: [512B 100%] 2041KB/s ETA: 00m00s mlibc-0.0pl5540_1.x86_64.xbps.sig2: 512B [avg rate: 2041KB/s] mlibc-0.0pl5540_1.x86_64.xbps: [2653KB 0%] 49MB/s ETA: 00m00s mlibc-0.0pl5540_1.x86_64.xbps: [2653KB 3%] 1987KB/s ETA: 00m26s mlibc-0.0pl5540_1.x86_64.xbps: 2653KB [avg rate: 54MB/s] mlibc-0.0pl5540_1: verifying RSA signature... base-files-1.0_1.x86_64.xbps.sig2: [512B 100%] 10MB/s ETA: 00m00s base-files-1.0_1.x86_64.xbps.sig2: 512B [avg rate: 10MB/s] base-files-1.0_1.x86_64.xbps: [8781B 46%] 95MB/s ETA: 00m00s base-files-1.0_1.x86_64.xbps: 8781B [avg rate: 204MB/s] base-files-1.0_1: verifying RSA signature... kernel-headers-6.12.8_1.x86_64.xbps.sig2: [512B 100%] 15MB/s ETA: 00m00s kernel-headers-6.12.8_1.x86_64.xbps.sig2: 512B [avg rate: 15MB/s] kernel-headers-6.12.8_1.x86_64.xbps: [1661KB 0%] 6849KB/s ETA: 00m00s kernel-headers-6.12.8_1.x86_64.xbps: 1661KB [avg rate: 2777MB/s] kernel-headers-6.12.8_1: verifying RSA signature... mlibc-headers-0.0pl5540_1.x86_64.xbps.sig2: [512B 100%] 16MB/s ETA: 00m00s mlibc-headers-0.0pl5540_1.x86_64.xbps.sig2: 512B [avg rate: 16MB/s] mlibc-headers-0.0pl5540_1.x86_64.xbps: [117KB 3%] 5822KB/s ETA: 00m00s mlibc-headers-0.0pl5540_1.x86_64.xbps: 117KB [avg rate: 167MB/s] mlibc-headers-0.0pl5540_1: verifying RSA signature... [*] Collecting package files mlibc-0.0pl5540_1: collecting files... base-files-1.0_1: collecting files... kernel-headers-6.12.8_1: collecting files... mlibc-headers-0.0pl5540_1: collecting files... [*] Unpacking packages mlibc-0.0pl5540_1: unpacking ... base-files-1.0_1: unpacking ... kernel-headers-6.12.8_1: unpacking ... mlibc-headers-0.0pl5540_1: unpacking ... 4 downloaded, 4 installed, 0 updated, 4 configured, 0 removed. [xbbs @ 2026-03-19 00:43:25+0000 INFO] Exit code: 0 [xbbs @ 2026-03-19 00:43:25+0000 INFO] Running command xbps-rindex -fa -- mlibc-0.0pl5540_1.x86_64.xbps (env={'XBPS_ARCH': 'x86_64'}, cwd='/var/lib/xbbs/tmp/tmp5zzcx9_q/build/xbps-repo') index: added `mlibc-0.0pl5540_1' (x86_64). index: 1 packages registered. [xbbs @ 2026-03-19 00:43:25+0000 INFO] Exit code: 0 [xbbs @ 2026-03-19 00:43:25+0000 INFO] Running command xbps-rindex -fa -- base-files-1.0_1.x86_64.xbps (env={'XBPS_ARCH': 'x86_64'}, cwd='/var/lib/xbbs/tmp/tmp5zzcx9_q/build/xbps-repo') index: added `base-files-1.0_1' (x86_64). index: 2 packages registered. [xbbs @ 2026-03-19 00:43:25+0000 INFO] Exit code: 0 [xbbs @ 2026-03-19 00:43:25+0000 INFO] Running command xbps-rindex -fa -- kernel-headers-6.12.8_1.x86_64.xbps (env={'XBPS_ARCH': 'x86_64'}, cwd='/var/lib/xbbs/tmp/tmp5zzcx9_q/build/xbps-repo') index: added `kernel-headers-6.12.8_1' (x86_64). index: 3 packages registered. [xbbs @ 2026-03-19 00:43:25+0000 INFO] Exit code: 0 [xbbs @ 2026-03-19 00:43:25+0000 INFO] Running command xbps-rindex -fa -- mlibc-headers-0.0pl5540_1.x86_64.xbps (env={'XBPS_ARCH': 'x86_64'}, cwd='/var/lib/xbbs/tmp/tmp5zzcx9_q/build/xbps-repo') index: added `mlibc-headers-0.0pl5540_1' (x86_64). index: 4 packages registered. [xbbs @ 2026-03-19 00:43:25+0000 INFO] Exit code: 0 [xbbs @ 2026-03-19 00:43:25+0000 INFO] Downloading artifact tools/x86_64/cross-binutils.tar.gz into /var/lib/xbbs/tmp/tmp5zzcx9_q/build/tools/cross-binutils.tar.gz [xbbs @ 2026-03-19 00:43:27+0000 INFO] Downloading artifact tools/x86_64/cross-pkg-config.tar.gz into /var/lib/xbbs/tmp/tmp5zzcx9_q/build/tools/cross-pkg-config.tar.gz [xbbs @ 2026-03-19 00:43:27+0000 INFO] Downloading artifact tools/x86_64/cross-libtool.tar.gz into /var/lib/xbbs/tmp/tmp5zzcx9_q/build/tools/cross-libtool.tar.gz [xbbs @ 2026-03-19 00:43:27+0000 INFO] Downloading artifact tools/x86_64/cross-autoconf-v2.69.tar.gz into /var/lib/xbbs/tmp/tmp5zzcx9_q/build/tools/cross-autoconf-v2.69.tar.gz [xbbs @ 2026-03-19 00:43:27+0000 INFO] Downloading artifact tools/x86_64/cross-gcc.tar.gz into /var/lib/xbbs/tmp/tmp5zzcx9_q/build/tools/cross-gcc.tar.gz [xbbs @ 2026-03-19 00:44:13+0000 INFO] Downloading artifact tools/x86_64/cross-automake-v1.15.tar.gz into /var/lib/xbbs/tmp/tmp5zzcx9_q/build/tools/cross-automake-v1.15.tar.gz [xbbs @ 2026-03-19 00:44:13+0000 INFO] Downloading artifact tools/x86_64/cross-toolchain.tar.gz into /var/lib/xbbs/tmp/tmp5zzcx9_q/build/tools/cross-toolchain.tar.gz xbstrap: Running the following plan: fetch attr checkout attr patch attr regenerate attr install base-files (inside sysroot.ri7_sg8n) install kernel-headers (inside sysroot.ri7_sg8n) install mlibc-headers (inside sysroot.ri7_sg8n) install mlibc (inside sysroot.ri7_sg8n) configure attr (inside sysroot.ri7_sg8n) build attr (inside sysroot.ri7_sg8n) pack attr xbstrap: fetch attr [1/11] Initialized empty Git repository in /var/lib/xbbs/tmp/tmp5zzcx9_q/src/ports/attr/.git/ From https://mirrors.managarm.org/mirror/git/attr * [new tag] v2.5.2 -> v2.5.2 xbstrap: checkout attr [2/11] HEAD is now at ee80fdb Version 2.5.2 xbstrap: patch attr [3/11] xbstrap: regenerate attr [4/11] xbstrap: Running ['./autogen.sh'] (tools: ['cross-toolchain', 'cross-autoconf-v2.69', 'cross-automake-v1.15', 'cross-binutils', 'cross-gcc', 'cross-pkg-config', 'cross-libtool']) via cbuildrt PID init is 364428 (outside the namespace) + po/update-potfiles + autopoint --force perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Copying file ABOUT-NLS Creating directory build-aux Copying file build-aux/config.rpath Copying file m4/codeset.m4 Copying file m4/fcntl-o.m4 Copying file m4/gettext.m4 Copying file m4/glibc2.m4 Copying file m4/glibc21.m4 Copying file m4/iconv.m4 Copying file m4/intdiv0.m4 Copying file m4/intl.m4 Copying file m4/intldir.m4 Copying file m4/intlmacosx.m4 Copying file m4/intmax.m4 Copying file m4/inttypes-pri.m4 Copying file m4/inttypes_h.m4 Copying file m4/lcmessage.m4 Copying file m4/lib-ld.m4 Copying file m4/lib-link.m4 Copying file m4/lib-prefix.m4 Copying file m4/lock.m4 Copying file m4/longlong.m4 Copying file m4/nls.m4 Copying file m4/po.m4 Copying file m4/printf-posix.m4 Copying file m4/progtest.m4 Copying file m4/size_max.m4 Copying file m4/stdint_h.m4 Copying file m4/threadlib.m4 Copying file m4/uintmax_t.m4 Copying file m4/visibility.m4 Copying file m4/wchar_t.m4 Copying file m4/wint_t.m4 Copying file m4/xsize.m4 Copying file po/Makefile.in.in Copying file po/Makevars.template Copying file po/Rules-quot Copying file po/boldquot.sed Copying file po/en@boldquot.header Copying file po/en@quot.header Copying file po/insert-header.sin Copying file po/quot.sed Copying file po/remove-potcdate.sin + automake --print-libdir perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). + am_libdir=/var/lib/managarm-buildenv/build/tools/cross-automake-v1.15/share/automake-1.15 + cp /var/lib/managarm-buildenv/build/tools/cross-automake-v1.15/share/automake-1.15/INSTALL doc/ + exec autoreconf -f -i perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. libtoolize: copying file 'build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:", LC_ALL = (unset), LC_CTYPE = "C.UTF-8", LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). configure.ac:37: installing 'build-aux/ar-lib' configure.ac:28: installing 'build-aux/compile' configure.ac:27: installing 'build-aux/config.guess' configure.ac:27: installing 'build-aux/config.sub' configure.ac:24: installing 'build-aux/install-sh' configure.ac:24: installing 'build-aux/missing' Makefile.am: installing 'build-aux/depcomp' parallel-tests: installing 'build-aux/test-driver' xbstrap: install base-files [5/11] xbstrap: Running ['xbps-remove', '-Fy', '-r', '/tmp/sysroot.ri7_sg8n', 'base-files'] xbstrap: Running ['xbps-install', '-fyU', '-r', '/tmp/sysroot.ri7_sg8n', '--repository', '/var/lib/xbbs/tmp/tmp5zzcx9_q/build/xbps-repo', 'base-files'] xbstrap: install kernel-headers [6/11] xbstrap: Running ['xbps-remove', '-Fy', '-r', '/tmp/sysroot.ri7_sg8n', 'kernel-headers'] xbstrap: Running ['xbps-install', '-fyU', '-r', '/tmp/sysroot.ri7_sg8n', '--repository', '/var/lib/xbbs/tmp/tmp5zzcx9_q/build/xbps-repo', 'kernel-headers'] xbstrap: install mlibc-headers [7/11] xbstrap: Running ['xbps-remove', '-Fy', '-r', '/tmp/sysroot.ri7_sg8n', 'mlibc-headers'] xbstrap: Running ['xbps-install', '-fyU', '-r', '/tmp/sysroot.ri7_sg8n', '--repository', '/var/lib/xbbs/tmp/tmp5zzcx9_q/build/xbps-repo', 'mlibc-headers'] xbstrap: install mlibc [8/11] xbstrap: Running ['xbps-remove', '-Fy', '-r', '/tmp/sysroot.ri7_sg8n', 'mlibc'] xbstrap: Running ['xbps-install', '-fyU', '-r', '/tmp/sysroot.ri7_sg8n', '--repository', '/var/lib/xbbs/tmp/tmp5zzcx9_q/build/xbps-repo', 'mlibc'] xbstrap: configure attr [9/11] xbstrap: Running ['@THIS_SOURCE_DIR@/configure', '--host=@OPTION:arch-triple@', '--prefix=/usr', '--disable-static', '--docdir=/usr/share/doc/attr-2.5.2', '--disable-nls'] (tools: ['cross-toolchain', 'cross-autoconf-v2.69', 'cross-automake-v1.15', 'cross-binutils', 'cross-gcc', 'cross-pkg-config', 'cross-libtool']) via cbuildrt PID init is 366728 (outside the namespace) checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for x86_64-linux-mlibc-strip... x86_64-linux-mlibc-strip checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu-mlibc checking for x86_64-linux-mlibc-gcc... x86_64-linux-mlibc-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether x86_64-linux-mlibc-gcc accepts -g... yes checking for x86_64-linux-mlibc-gcc option to accept ISO C89... none needed checking whether x86_64-linux-mlibc-gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of x86_64-linux-mlibc-gcc... gcc3 checking how to run the C preprocessor... x86_64-linux-mlibc-gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for an ANSI C-conforming const... yes checking for mode_t... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking whether __attribute__((visibility())) is supported... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for x86_64-linux-mlibc-ar... x86_64-linux-mlibc-ar checking the archiver (x86_64-linux-mlibc-ar) interface... ar checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by x86_64-linux-mlibc-gcc... /var/lib/managarm-buildenv/build/tools/cross-gcc/x86_64-linux-mlibc/bin/ld checking if the linker (/var/lib/managarm-buildenv/build/tools/cross-gcc/x86_64-linux-mlibc/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /var/lib/managarm-buildenv/build/tools/cross-binutils/bin/x86_64-linux-mlibc-nm -B checking the name lister (/var/lib/managarm-buildenv/build/tools/cross-binutils/bin/x86_64-linux-mlibc-nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu-mlibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /var/lib/managarm-buildenv/build/tools/cross-gcc/x86_64-linux-mlibc/bin/ld option to reload object files... -r checking for file... file checking for x86_64-linux-mlibc-objdump... x86_64-linux-mlibc-objdump checking how to recognize dependent libraries... pass_all checking for x86_64-linux-mlibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-linux-mlibc-ranlib... x86_64-linux-mlibc-ranlib checking for x86_64-linux-mlibc-ar... (cached) x86_64-linux-mlibc-ar checking for archiver @FILE support... @ checking for x86_64-linux-mlibc-strip... (cached) x86_64-linux-mlibc-strip checking command to parse /var/lib/managarm-buildenv/build/tools/cross-binutils/bin/x86_64-linux-mlibc-nm -B output from x86_64-linux-mlibc-gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for x86_64-linux-mlibc-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if x86_64-linux-mlibc-gcc supports -fno-rtti -fno-exceptions... no checking for x86_64-linux-mlibc-gcc option to produce PIC... -fPIC -DPIC checking if x86_64-linux-mlibc-gcc PIC flag -fPIC -DPIC works... yes checking if x86_64-linux-mlibc-gcc static flag -static works... no checking if x86_64-linux-mlibc-gcc supports -c -o file.o... yes checking if x86_64-linux-mlibc-gcc supports -c -o file.o... (cached) yes checking whether the x86_64-linux-mlibc-gcc linker (/var/lib/managarm-buildenv/build/tools/cross-gcc/x86_64-linux-mlibc/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether NLS is requested... no checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for ld used by x86_64-linux-mlibc-gcc... /var/lib/managarm-buildenv/build/tools/cross-gcc/x86_64-linux-mlibc/bin/ld -m elf_x86_64 checking if the linker (/var/lib/managarm-buildenv/build/tools/cross-gcc/x86_64-linux-mlibc/bin/ld -m elf_x86_64) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking whether to use NLS... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libattr.pc config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating include/config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing include/attr commands xbstrap: build attr [10/11] xbstrap: Running ['make', '-j@PARALLELISM@'] (tools: ['cross-toolchain', 'cross-autoconf-v2.69', 'cross-automake-v1.15', 'cross-binutils', 'cross-gcc', 'cross-pkg-config', 'cross-libtool']) via cbuildrt PID init is 368638 (outside the namespace) Making all in po make[1]: Entering directory '/var/lib/managarm-buildenv/build/pkg-builds/attr/po' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/var/lib/managarm-buildenv/build/pkg-builds/attr/po' make[1]: Entering directory '/var/lib/managarm-buildenv/build/pkg-builds/attr' CC libattr/libattr_la-attr_copy_check.lo CC libattr/libattr_la-attr_copy_action.lo CC libattr/libattr_la-attr_copy_fd.lo CC libattr/libattr_la-attr_copy_file.lo CC libattr/libattr_la-libattr.lo CC libattr/libattr_la-syscalls.lo CC libmisc/high_water_alloc.lo CC libmisc/next_line.lo CC libmisc/quote.lo CC libmisc/unquote.lo CC libmisc/walk_tree.lo CC tools/attr.o CC tools/getfattr.o CC tools/setfattr.o CCLD libattr.la CCLD libmisc.la CCLD attr CCLD getfattr CCLD setfattr make[1]: Leaving directory '/var/lib/managarm-buildenv/build/pkg-builds/attr' xbstrap: Running ['make', 'install'] (tools: ['cross-toolchain', 'cross-autoconf-v2.69', 'cross-automake-v1.15', 'cross-binutils', 'cross-gcc', 'cross-pkg-config', 'cross-libtool']) via cbuildrt PID init is 369520 (outside the namespace) Making install in po make[1]: Entering directory '/var/lib/managarm-buildenv/build/pkg-builds/attr/po' if test "attr" = "gettext-tools"; then \ /usr/bin/mkdir -p /var/lib/managarm-buildenv/build/packages/attr.collect/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 /var/lib/managarm-buildenv/src/ports/attr/po/$file \ /var/lib/managarm-buildenv/build/packages/attr.collect/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /var/lib/managarm-buildenv/build/packages/attr.collect/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[1]: Leaving directory '/var/lib/managarm-buildenv/build/pkg-builds/attr/po' make[1]: Entering directory '/var/lib/managarm-buildenv/build/pkg-builds/attr' make[2]: Entering directory '/var/lib/managarm-buildenv/build/pkg-builds/attr' /usr/bin/mkdir -p '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/lib' /bin/bash ./libtool --mode=install /usr/bin/install -c libattr.la '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/lib' libtool: install: /usr/bin/install -c .libs/libattr.so.1.1.2502 /var/lib/managarm-buildenv/build/packages/attr.collect/usr/lib/libattr.so.1.1.2502 libtool: install: (cd /var/lib/managarm-buildenv/build/packages/attr.collect/usr/lib && { ln -s -f libattr.so.1.1.2502 libattr.so.1 || { rm -f libattr.so.1 && ln -s libattr.so.1.1.2502 libattr.so.1; }; }) libtool: install: (cd /var/lib/managarm-buildenv/build/packages/attr.collect/usr/lib && { ln -s -f libattr.so.1.1.2502 libattr.so || { rm -f libattr.so && ln -s libattr.so.1.1.2502 libattr.so; }; }) libtool: install: /usr/bin/install -c .libs/libattr.lai /var/lib/managarm-buildenv/build/packages/attr.collect/usr/lib/libattr.la libtool: warning: remember to run 'libtool --finish /usr/lib' /usr/bin/mkdir -p '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c attr getfattr setfattr '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/bin' libtool: warning: 'libattr.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/attr /var/lib/managarm-buildenv/build/packages/attr.collect/usr/bin/attr libtool: warning: 'libattr.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/getfattr /var/lib/managarm-buildenv/build/packages/attr.collect/usr/bin/getfattr libtool: warning: 'libattr.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/setfattr /var/lib/managarm-buildenv/build/packages/attr.collect/usr/bin/setfattr /usr/bin/mkdir -p '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/etc' /usr/bin/install -c -m 644 /var/lib/managarm-buildenv/src/ports/attr/xattr.conf '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/etc' subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /usr/bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /usr/bin/mkdir -p "$2" || exit 1; /usr/bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "/var/lib/managarm-buildenv/src/ports/attr/include/attributes.h" "/var/lib/managarm-buildenv/build/packages/attr.collect/usr/include/attr" subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /usr/bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /usr/bin/mkdir -p "$2" || exit 1; /usr/bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "/var/lib/managarm-buildenv/src/ports/attr/include/error_context.h" "/var/lib/managarm-buildenv/build/packages/attr.collect/usr/include/attr" subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /usr/bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /usr/bin/mkdir -p "$2" || exit 1; /usr/bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "/var/lib/managarm-buildenv/src/ports/attr/include/libattr.h" "/var/lib/managarm-buildenv/build/packages/attr.collect/usr/include/attr" /usr/bin/mkdir -p '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/share/doc/attr-2.5.2' /usr/bin/install -c -m 644 /var/lib/managarm-buildenv/src/ports/attr/doc/CHANGES /var/lib/managarm-buildenv/src/ports/attr/doc/COPYING /var/lib/managarm-buildenv/src/ports/attr/doc/COPYING.LGPL '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/share/doc/attr-2.5.2' /usr/bin/mkdir -p '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/share/man/man1' /usr/bin/install -c -m 644 /var/lib/managarm-buildenv/src/ports/attr/man/man1/attr.1 /var/lib/managarm-buildenv/src/ports/attr/man/man1/getfattr.1 /var/lib/managarm-buildenv/src/ports/attr/man/man1/setfattr.1 '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/share/man/man1' /usr/bin/mkdir -p '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/share/man/man3' /usr/bin/install -c -m 644 /var/lib/managarm-buildenv/src/ports/attr/man/man3/attr_get.3 /var/lib/managarm-buildenv/src/ports/attr/man/man3/attr_list.3 /var/lib/managarm-buildenv/src/ports/attr/man/man3/attr_multi.3 /var/lib/managarm-buildenv/src/ports/attr/man/man3/attr_remove.3 /var/lib/managarm-buildenv/src/ports/attr/man/man3/attr_set.3 '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/share/man/man3' /usr/bin/mkdir -p '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/lib/pkgconfig' /usr/bin/install -c -m 644 libattr.pc '/var/lib/managarm-buildenv/build/packages/attr.collect/usr/lib/pkgconfig' make install-data-hook make[3]: Entering directory '/var/lib/managarm-buildenv/build/pkg-builds/attr' set -e; \ cd "/var/lib/managarm-buildenv/build/packages/attr.collect/usr/share/man"; \ for d in man/man1/attr.1 man/man1/getfattr.1 man/man1/setfattr.1 man/man3/attr_get.3 man/man3/attr_list.3 man/man3/attr_multi.3 man/man3/attr_remove.3 man/man3/attr_set.3; do \ man_section=${d##*.}; \ d=${d#man/}; \ dst=${d##*/}; \ for m in `gawk \ '/^\.S[h|H] NAME/ {ok=1; next} ok {print; exit}' $d \ | /usr/bin/sed \ -e 's/^\.Nm //' -e 's/,/ /g' -e 's/\\-.*//' \ -e 's/\\\f[0-9]//g' -e 's/ / /g;q'`; \ do \ [ "$m" = "\\" ] && continue; \ ln="man$man_section/$m.$man_section"; \ [ -e "$ln" ] && continue; \ echo ln -s $dst $ln; \ ln -s $dst $ln; \ done; \ done ln -s attr_get.3 man3/attr_getf.3 ln -s attr_list.3 man3/attr_listf.3 ln -s attr_multi.3 man3/attr_multif.3 ln -s attr_remove.3 man3/attr_removef.3 ln -s attr_set.3 man3/attr_setf.3 make[3]: Leaving directory '/var/lib/managarm-buildenv/build/pkg-builds/attr' make[2]: Leaving directory '/var/lib/managarm-buildenv/build/pkg-builds/attr' make[1]: Leaving directory '/var/lib/managarm-buildenv/build/pkg-builds/attr' xbstrap: Removed libtool file libattr.la xbstrap: pack attr [11/11] xbstrap: Running ['xbps-create', '-A', 'x86_64', '-s', 'attr', '-n', 'attr-2.5.2_1', '-D', 'mlibc>=0', '--desc', 'Extended attributes tools', '--long-desc', 'This package contains utilities to administer the extended attributes of filesystem objects.', '--license', 'LGPL-2.1-or-later', '--homepage', 'https://savannah.nongnu.org/projects/attr', '--maintainer', 'Dennis Bonke ', '--tags', 'sys-apps', '/tmp/tmpvdsopm34'] xbstrap: Running ['xbps-rindex', '-fa', '/var/lib/xbbs/tmp/tmp5zzcx9_q/build/xbps-repo/attr-2.5.2_1.x86_64.xbps'] (x86_64) [xbbs @ 2026-03-19 00:44:35+0000 INFO] Uploading artifact package-x86_64:attr from filename /var/lib/xbbs/tmp/tmp5zzcx9_q/build/xbps-repo/attr-2.5.2_1.x86_64.xbps [xbbs @ 2026-03-19 00:44:35+0000 INFO] Build succeeded.